Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 178

Fans
Breakout and recess in the HDD fan module
Figure 95: HDD fan module - breakout and recess
1 Breakout for the NVMe cables
If using a PCIe backplane:
▶ Break out the plastic flap of the HDD fan module by hand
2 Recess for the power/OOB cable routing of SAS configuration
Concluding steps
▶ Install the HDD fan module, see
HDD variant)" on page
▶
"Reassembling" on page
▶
"Connecting the power cord (standard PSU, with cable tie)" on page
178
(see oval) so that the NVMe cables can be run through the
breakout. This part can be disposed.
"Installing the HDD fan module (2.5-inch
68.
54.
Upgrade and Maintenance Manual
57.
TX1320 M5