Basic hardware procedures
4.8
Reassembling
4.8.1
Safety notes
CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see
4.8.2
Installing the server cover
Figure 10: Closing the server cover
▶ Fit the server cover on the chassis (1).
▶ Slide the server cover towards the rear until the locking lever grips (2).
▶ Fold down the locking lever (3).
54
"Important information" on page
Upgrade and Maintenance Manual
29.
TX1320 M5