M.2 Ssd; Slots And Bolts For M.2 Ssds - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Replacing the iRMC microSD card
▶ Remove the defective iRMC microSD card, see
microSD card" on page
CAUTION
(not valid for Europe, Middle East, India and Africa)
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
▶ Install the new iRMC microSD card, see
on page 313.
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
17.6

M.2 SSD

17.6.1

Slots and bolts for M.2 SSDs

The system board offers two M.2 slots (Key M) with support for 80 mm and
110 mm long M.2 SSDs.
TX1320 M5
315.
54.
57.
60.
Upgrade and Maintenance Manual
System board and components
"Removing the iRMC
"Installing the iRMC microSD card"
317