Installing The Hdd Fan Module (2.5-Inch Hdd Variant) - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Basic hardware procedures
4.12.4 Installing the HDD fan module (2.5-inch HDD
variant)
Figure 25: Installing the HDD fan module
▶ Install the HDD fan module onto the HDD cage until the locking latch snaps
in place (see circle).
▶ Ensure that the fans freely rotate.
▶ Connect the fan cable of HDD fan module 1 to the system board connector
"FAN4 SYS".
▶ Connect the fan cable of HDD fan module 2 to the system board connector
"FAN2 SYS".
68 Upgrade and Maintenance Manual TX1320 M5