Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 10

Content
5.3.6 Resetting the error status after replacing memory modules or
CPU
5.3.6.1 Resetting the error status after replacing memory modules
5.3.6.2 Resetting the error status after replacing CPUs
5.3.7 Enabling the boot watchdog
5.3.8 Enabling replaced components in the BIOS
5.3.9 Verifying the system time settings
5.3.10 Viewing and clearing the System Event Log (SEL)
5.3.11 Updating the NIC configuration file in a Linux and VMware
environment
5.3.12 Resuming BitLocker functionality
5.3.13 Performing a RAID array rebuild
5.3.14 Looking for MAC/WWN/GUID and SAS addresses
5.3.14.1 Basic information
5.3.14.2 Looking for the MAC address of a LAN controller
5.3.14.3 Looking for the WWN address of a fibre channel controller
5.3.14.4 Looking for the GUID address of an infiniband or Omni-Path
controller
5.3.14.5 Looking for SAS addresses of SAS controllers for external
devices
5.3.15 Using the Chassis ID Prom Tool
5.3.16 Configuring LAN teaming
5.3.17 Switching off the ID indicator
5.3.18 Performing a fan test
6 Power supply unit (PSU)
6.1 Safety notes
6.2 Basic information
6.3 Standard power supply
6.3.1 Replacing the standard PSU
6.3.2 Converting a standard power supply to a redundant power
supply
6.4 Redundant power supply
6.4.1 Installing a hot-plug PSU
6.4.2 Removing a hot-plug PSU
Upgrade and Maintenance Manual
82
82
84
86
87
87
88
90
91
92
93
93
93
94
95
95
96
98
99
100
101
101
101
103
103
109
116
116
120
TX1320 M5