Installing An M.2 Ssd - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

The second hole is for M.2 SSDs with 110 mm length (see orange
circles). If necessary, move the M.2 lock to the second hole, see
"Moving the M.2 lock to the second hole" on page
17.6.2

Installing an M.2 SSD

Upgrade and Repair Unit
(URU)
Tools:
tool-less
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable, remove an expansion card, see
on page 203.
▶ If applicable, remove the HDD fan module (2.5-inch HDD variant), see
"Removing the HDD fan module (2.5-inch HDD variant)" on page
▶ If applicable, remove the NVMe cables from the PCIe backplane, see
Figure 84.
Moving the M.2 lock to the second hole
This step is only necessary when installing M.2 SSDs with 110 mm
length.
TX1320 M5
45.
Upgrade and Maintenance Manual
System board and components
319.
Hardware: 5 minutes
Software: 15 minutes
46.
48.
"Removing expansion cards"
67.
319