Starting The F160 And Displaying Images; Starting The Conversational Menus - Omron F160 Operation Manual

Starting the F160 and Displaying Images

2-1

Starting the F160 and Displaying Images

2-1-1

Starting the Conversational Menus

CHECK
SeeAlso
12
This section describes how to start the F160 Conversational Menus and how
to display images on the monitor. Refer to the displayed image when adjusting
the Camera position and focus.
1. Check that the basic F160 components have been connected properly.
Power supply
Before connecting components or wiring power supply lines and grounding
wires, be sure to refer to the relevant section in the Setup Manual.
Refer to the Setup Manual.
2. Turn ON the power supply to the monitor.
3. Turn ON the power supply on the F160.
The Select Menus Screen will be displayed.
Select Menus
Conversational Menus
End
4. Check that Conversational Menus is selected and press the ENT Key.
After a short pause, the Camera Settings Screen will be displayed.
Camera settings
Camera
F160-S1
Intelligent Lighting 0 :
Out of use
Intelligent Lighting 1 :
Out of use
End
ESC
F1
F1
F1
F160
VISION MATE
CONTROLLER
POWER
SYNC
:
Section 2-1
SHIFT
ENT
TRIG
F1
F1
F1 Console
F1
F1
F1
Camera
Monitor