Making Calls Using Ip Addresses - Grandstream Networks GRP260X Series User Manual

Via Call History. Dial the number logged in the phone's call history.
1. Press the MENU button to bring up the main menu then enter Call History; or
2. Press the "History" soft key when the phone is in an idle state;
3. Select the entry you would like to call using the navigation arrow keys;
4. Press SEND button to dial out.
Via Phonebook. Dial the number from the phonebook.
1. Press the MENU button to bring up the main menu then enter Contacts; or
2. Press the "Contacts" soft key when the phone is in an idle state;
3. Enter Local / BS Phonebook using the navigation arrow keys;
4. Select the contact you would like to call
Note
Pressing the OK button to enter the contact details page , users can edit the phone number and choose which account to dial
that number by clicking "Edit before dialing" soft key.
5. Press SEND button to dial the selected contact.
Notes:
After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds, configurable via
Web GUI) before dialing out. Press SEND or # key to override the No Key Entry Timeout;
If digits have been entered after taking the handset off-hook, the SEND key will work as SEND instead of showing the
history of Dialed extensions;
(#) or (*) can be chosen as send keys from WEB GUI �� Accounts �� Account X �� Call Settings �� Key as Send.
During an active call, users can see the call info on LCD:
– The call lasting time
– Contact information if the number is already saved in the phonebook.

Making Calls using IP Addresses

Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls can be made
between two phones if:
Both phones have public IP addresses; or
Both phones are on the same LAN/VPN using private or public IP addresses; or
Both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or
DMZ).
To make a direct IP call, please follow the steps below:
1. Press Hook Switch/Speaker or Headset button to bring out the dialing screen.
2. Input the 12-digit target IP address (Please see the example below).
3. Press the "Dial" softkey to dial.
Note
When use direct IP call, "Use Random Port" option should be set to "No".
For example:
If the target IP address is 192.168.1.60 and the port is 5062 (i.e., 192.168.1.60:5062), input the following: 192*168*1*60#5062.
The * key represents the dot (.), and the # key represents the colon (:).