Wakeup Service; Wakeup Service Using Admin Login; Table 80: Wakeup Service; Figure 168: Create New Wakeup Service - Grandstream Networks UCM6200 User Manual

The WakeUp service can be used to schedule a reminder or wake up calls to any valid destination. This service is
available on the UCM6200 as a separated module.
There are three ways to set up Wakeup Service:
Using admin login
-
Using user portal
-
Using feature code
-

WakeUp Service using admin login

Login to the UCM as admin.
-
WakeUp service can be found under "PBX -> Call Features -> Wakeup Service", click on
-
Click and
-
Enable Wakeup Service
Name

WAKEUP SERVICE

to create a new wakeup service. The following window will popup.

Figure 168: Create New Wakeup Service

to apply the changes.

Table 80: Wakeup Service

Enable Wakeup service.
Enter a name to identify the wakeup service.
UCM6200 Series User Manual
P a g e | 253