Settings Page Definitions; Table 12: Settings Page Definitions - Grandstream Networks DP750 Administration Manual

Disable Call Disables playing call waiting tone during active call when receiving a second
Waiting Tone incoming call. The CWCID will still be displayed. Default is No.
Custom Ringtone Assigns custom ringtone to specific handset from the ringtones available on the
base station. It takes up to 10 ringtone files which have be named as ring1.bin to
ring10.bin, and you can assign one ringtone to each handset. Default is Disabled.
Time Format Set the displayed Time Format on handsets to 12 hours or 24 hours. Default is 12hr.
Date Format Set the displayed Date Format on handsets.

Settings Page Definitions

Network Settings – Basic Settings
IP Address Mode Selects IP address mode (DHCP, Static IP or PPPoE) for DP750 Base Station.
Preferred DNS Specifies preferred DNS server to use when DHCP, PPPoE or Static mode is set.
Server
DHCP Settings Host name
(Option 12)
Vendor Class ID
(Option 60)
PPPoE Settings Configures PPPoE account ID, password and service name.
Static IP Settings Sets IP address, subnet mask, gateway, DNS server 1, and DNS server 2.
Network Settings – Advanced Settings
Enables/Disables 802.1X mode. To enable this mode, you should select EAP-MD5.
802.1X Mode
Default is Disable.
Configures the identity for 802.1X mode.
802.1X Identity
MD5 Password Determines the MD5 password for 802.1X mode.
802.1X CA Uploads / deletes the 802.1X CA certificates.
Certificate
Uploads / Deletes the 802.1X Client Certificates.
802.1X Client
Certificate

Table 12: Settings Page Definitions

Specifies the name of the client. The name may or may not be
qualified with the local domain name. This field is optional but
may be required by ISP.
Exchanges vendor class ID by clients and servers to convey
particular configuration or other identification information about a
client. Default is DP7XX.
DP750/DP720 Administration Guide
Version 1.0.11.4
P a g e | 59