Network Setting - Sega TETRIS GIANT Owner's Manual

9-2-14 NETWORK SETTING

Tests the connection and change the settings so that the network can connect.
The title program connects using the network settings set here. Unlike other settings, network settings are saved to
the network memory section in the SystemSP board the instant that the settings are changed.
Reset the power when network settings have been changed. Be careful because if the power is not reset, the program
will continue to operate without reflecting the setting changes, and this may cause unexpected operation.
NOTE: This product does not use a network connection. Do not change the NETWORK TYPE from the NONE
setting.
NETWORK TYPE (NONE/ETHER)
Set whether or not to use a network connection.
NETWORK SETTING
NETWORK TYPE
SET IP ADDRESS
CLEAR NETWORK SETTING
NETWORK TEST
->EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Network Setting is Set to "ETHER"
1
Use the SERVICE Button to move the cursor to the desired test item.
2
Align the cursor with the desired item and press the TEST Button to change the setting or to go to the
detailed setting screen.
NONE This is the setting not to connect. Use this setting when not using a network connection.
ETHER This is the setting to use Ethernet for a network connection.
3
Select EXIT and press the TEST Button. The SYSTEM MENU screen reappears.
ETHER
EXPLANATION OF TEST AND DATA DISPLAY
NETWORK SETTING
NETWORK TYPE
CLEAR NETWORK SETTING
NETWORK TEST
->EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Network Setting is Set to "NONE"
87
9
NONE