Attaching The Banner - Sega TETRIS GIANT Owner's Manual

30
ASSEMBLY AND INSTALLATION

6-1-3 Attaching the Banner

1
Pass the shanks on the side banner sash removed in Step 2 of "6-1-2 Attaching the Roof Panel" through the
holes on side banner R (4 places). Make sure that the side banner sash is facing the direction shown in the
figure.
SIDE BANNER SASH
6
2
Insert the shanks on the side banner sash into the counter-sunk holes on the roof panel and support it.
Another person should fasten it in place with the 4 truss screws removed in Step 2 of "6-1-2 Attaching
the Roof Panel." Be careful not to damage the screen (white surface) with the side banner sash while
performing this work.
ROOF PANEL
Insert.
TRUSS SCREW
LARGE FLAT WASHER
SIDE BANNER SASH
SIDE BANNER R
SIDE BANNER R
SHANK
Be careful with the direction of the banner sash
Support.
TRUSS SCREW (4), black
M5 x 12, large flat washer used