Sega TETRIS GIANT Owner's Manual page 144

4
Attach the back door, lock it with the master key, and fasten it in place with 2 truss screws.
5
The software installation will begin when the power is turned on. It will take approximately 10 minutes to
complete. If it finishes successfully, the advertisement screen will display.
NOTE: If the installation does not finish successfully, turn the power off, reinsert the CF card, and turn
the power back on. If that does not work, contact the office listed in this manual.
6
Turn the power off.
7
Remove the 2 truss screws, unlock the back door with the master key and take it off.
8
Remove the CF card from the card slot on the SystemSP board. Store the CF card in a safe place.
9
Attach the back door, lock it with the master key, and fasten it in place with 2 truss screws.
GAME BOARD (SystemSP)
135
16