Table of Contents
Advertisement
58
ASSEMBLY AND INSTALLATION
6-10 REPLACING THE DENOMINATION SHEET
If the coin credit settings are changed in TEST MODE (see 9-2-8 and 9-3-4), replace the denomination sheet as
necessary.
1
Turn the power off.
2
Unlock the service door with the master key and open it.
6
3
Grab both sides of the switch with your fingers
and rotate it approximately 45 degrees in the
direction of the arrow in the figure to take it
off.
4
Remove the nut and supporter at the base of
the button and take off the button.
SWITCH
BUTTON
SUPPORTER
NUT
Unlock.
Advertisement
Table of Contents
