Sega TETRIS GIANT Owner's Manual page 98

2
Each item is explained below.
REMOTE
IP ADDRESS(E)
SUBNET MASK(E)
GATEWAY(E)
PRIMARY DNS
SECONDARY DNS
CURRENT ************, *.*.*.*
3
Select EXIT and press the TEST Button. The NETWORK SETTING screen reappears.
CLEAR NETWORK SETTING
Returns all the network settings to default and sets the game not to connect.
The NETWORK TYPE display will become "NONE."
1
When YES (CLEAR) has been selected and the TEST Button pressed, all data is cleared. Then "WRITING
DONE." is blinked and press the TEST Button to return to the NETWORK SETTING screen.
2
Move the cursor to NO (CANCEL) and press the TEST Button to return to the NETWORK SETTING
screen without clearing the data.
Set whether or not to set network settings automatically.
ENABLE Obtain network settings automatically. PRIMARY DNS and
SECONDARY DNS can be set.
DISABLE Set network settings manually. IP ADDRESS(E),
SUBNETMASK(E), GATEWAY(E), PRIMARY DNS, and
SECONDARY DNS can be set.
Set your own IP address. After entering the numbers, align the cursor with
SET and press the TEST Button to save the setting.
When REMOTE is set to ENABLE, this cannot be selected.
Set the subnet mask. After entering the numbers, align the cursor with SET
and press the TEST Button to save the setting.
When REMOTE is set to ENABLE, this cannot be selected.
Set the GATEWAY. After entering the numbers, align the cursor with SET
and press the TEST Button to save the setting.
When REMOTE is set to ENABLE, this cannot be selected.
Set the PRIMARY DNS. After entering the numbers, align the cursor with
SET and press the TEST Button to save the setting.
Set the SECONDARY DNS. After entering the numbers, align the cursor
with SET and press the TEST Button to save the setting.
Displays the current setting for the item you are setting.
EXPLANATION OF TEST AND DATA DISPLAY
CLEAR NETWORK SETTING
YES(CLEAR)
->NO(CANCEL)
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
89
9