Output Test - Sega TETRIS GIANT Owner's Manual

94
EXPLANATION OF TEST AND DATA DISPLAY

9-3-2 OUTPUT TEST

This screen is for confirming the proper operation of each output device used by the game.
Periodically use this screen to check the status of each output device.
-> EXIT
9
SELECT WITH SERVICE BUTTON
1
Use the SERVICE Button to move the cursor to the item you would like to check. Press the TEST Button,
and the display on the right will change from "OFF" to "ON," and the lamp will turn on.
Press the TEST Button again, and the display will change from "ON" to "OFF," and the lamp will turn off.
If the lamp turns on and off, the wiring is functioning normally.
2
Each item is explained below.
LAMP 1P START
LAMP 2P START
LAMP 1P LEFT
LAMP 2P LEFT
LAMP 1P RIGHT
LAMP 2P RIGHT
3
When all tests are completed, move the cursor to EXIT and press the TEST Button. The GAME TEST
MODE screen reappears.
GAME TEST MODE
OUTPUT TEST
LAMP 1P START
LAMP 2P START
LAMP 1P LEFT
LAMP 2P LEFT
LAMP 1P RIGHT
LAMP 2P RIGHT
AND PRESS TEST BUTTON
Player 1 START Button
Player 2 START Button
Player 1 joystick Left Button
Player 2 joystick Left Button
Player 1 joystick Right Button
Player 2 joystick Right Button
START BUTTON
1P
LEFT BUTTON
1P
RIGHT BUTTON
1P
OFF
OFF
OFF
OFF
OFF
OFF
START BUTTON
2P
RIGHT BUTTON
2P
LEFT BUTTON
2P