Sega TETRIS GIANT Owner's Manual page 58

10
Loosen the wing bolts, move the projector, and adjust the position of the image on the screen. Adjust the
outline of the image so that it is within the screen. Retighten the wing bolts and fasten the projector in
place.
Loosen.
11
Refer to the projector manual (CD) to adjust the focus.
12
Exit TEST MODE and turn off the power (see Chapter 9).
Wing bolts are on the inside.
ASSEMBLY AND INSTALLATION
Wing bolts are on the inside.
Loosen.
Both sides
49
6