Sega TETRIS GIANT Owner's Manual page 63

54
ASSEMBLY AND INSTALLATION
Attaching the Support Bracket
1
Refer to "6-2 Assembling the Controller Cabinet" and "6-4 Connecting the power cable and Grounding the
Cabinet" to assemble the controller cabinet.
2
Move the controller cabinet to the installation site. Be careful not to push on the joystick.
3
Refer to Steps 1 - 4 of "6-5 Adjusting the Position of the Projector" and adjust the screen size while
displaying the image on your own screen.
4
The controller cabinet has 4 casters and 4 adjusters. Make sure that all the adjusters are resting on the floor.
Use a wrench to set adjuster heights so that the controller cabinet will stay level.
6
5
Refer to Steps 9 - 13 of "6-5 Adjusting the Position of the Projector" and adjust the position of the image.
6
Attach the support bracket and fasten it in place with 4 hexagon socket bolts. Make sure that the support
bracket touches the ground.
ADJUSTER
CASTER
HEXAGON SOCKET BOLT (4)
M8 x 35, large flat & spring washers used
SUPPORT BRACKET