Attaching The Chain - Sega TETRIS GIANT Owner's Manual

50
ASSEMBLY AND INSTALLATION

6-6 ATTACHING THE CHAIN

Attach the chain to the controller cabinet and the screen stand. Refer to the figure and make sure the plate is attached
in the correct direction.
6
1
Affix the chain holder B to the controller cabinet and fasten it in place with the screw and the bush.
2
Affix the chain holder A and the chain with 1 truss screw.
SCREW HOLE ON CONTROLLER CABINET
CHAIN HOLDER B
SCREW (1), black
M4 x 16, w/flat & spring washers
TRUSS SCREW (1), black
M4 x 8
Fastening Chain Holder A in Place
BUSH
Fastening Chain Holder B in Place
CHAIN HOLDER A
CHAIN