Table of Contents
Advertisement
4
Move the controller cabinet forward or backwards to set the screen display size.
5
Move joint bracket R to the left and right to
line it up with the screw holes and lightly
fasten it in place with 2 hexagon bolts. Lightly
fasten joint bracket L in place on the other side
with 2 hexagon bolts as well.
HEXAGON BOLT (2), black
M8 x 20, w/flat & spring washers, large flat washer used
6
Use a hexagon wrench with a WAF of 5 mm to fully tighten the 2 hexagon socket bolts and fasten joint
bracket R to the controller cabinet. Fasten joint bracket L on the other side in the same way.
HEXAGON SOCKET BOLT (2)
M8 x 35, large flat & spring washers used
CONTROLLER CABINET
ASSEMBLY AND INSTALLATION
SCREEN
47
6
Advertisement
Table of Contents
