Setting Up The Controller Cabinet - Sega TETRIS GIANT Owner's Manual

6-3 SETTING UP THE CONTROLLER CABINET

1
Use an Allen wrench with a WAF (with across flats) of 5 mm to remove the 4 hexagon socket bolts on the
sides of the controller cabinet.
2
Attach joint bracket R and lightly tighten the hexagon socket bolts removed in Step 1. Attach joint bracket
L on the other side and lightly tighten the 2 hexagon socket bolts.
HEXAGON SOCKET BOLT (total 4)
M8 x 35, large flat & spring washers used
JOINT BRACKET R
ASSEMBLY AND INSTALLATION
HEXAGON SOCKET BOLT (2)
M8 x 35, large flat & spring
washers used
41
6