System Information; Ram Test - Sega TETRIS GIANT Owner's Manual

9-2-2 SYSTEM INFORMATION

Checks the version of each system program of the SystemSP
board.
1
Each item is explained below.
REGION This is the region code of the SystemSP board.
BOOT VERSION This displays the version of the SystemSP board boot program.
FIRM VERSION This displays the version of the SystemSP network firmware.
SERIAL NO. This displays the SystemSP board serial number.
2
Press the TEST Button to move to the SYSTEM MENU screen.

9-2-3 RAM TEST

Do not turn the power off while performing the RAM TEST as it may damage the
machine.
Checks the operation of the RAM on the SystemSP board.
If operation is normal, "GOOD" will be displayed, and if there
is a problem, "BAD" will be displayed.
1
The test begins immediately after entering this TEST MODE.
2
During the test, "TESTING NOW" is displayed on the screen.
3
When all tests are completed, press the TEST Button. The SYSTEM MENU screen reappears.
EXPLANATION OF TEST AND DATA DISPLAY
SYSTEM INFORMATION
REGION ****
BOOT VERSION ****
FIRM VERSION ****(********)
SERIAL NO. ***************
PRESS TEST BUTTON TO EXIT
RAM TEST
TESTING NOW
IC71 GOOD
IC52S GOOD
IC33S GOOD IC34
IC35 GOOD IC36S GOOD
IC37 GOOD IC39
IC38S GOOD IC40S GOOD
IC41 GOOD IC43
IC42S GOOD IC44S GOOD
PRESS TEST BUTTON TO EXIT
73
9
GOOD
GOOD
GOOD