Sega TETRIS GIANT Owner's Manual page 48

4
Attach the halogen lamp to the halogen lamp cover. Be careful not to touch the glass surface of the halogen
lamp. Oil from your fingers or hands could cause burning.
NOTE: 1 of the 3 supplied halogen lamps is a spare.
5
Attach the ground terminal, flat washer, spring washer, and hexagon nut to the threaded shaft inside the
halogen lamp cover in that order, and fasten it in place.
6
Connect the connector.
HALOGEN LAMP
HEXAGON NUT (1)
M4, flat & spring washers used
Connect the connector.
VL2P
ASSEMBLY AND INSTALLATION
39
6