Table of Contents
Advertisement
90
EXPLANATION OF TEST AND DATA DISPLAY
NETWORK TEST
Checks the operation of the network connection.
VERSION
STATUS
CHECKING
ETHER MODE
CHECKING NETWORK
REMOTE DISABLE
LOOPBACK - GOOD
GATEWAY -- N/A
SERVER --- N/A
-- COMPLETED --
PRESS TEST BUTTON TO EXIT
9
1
The test begins immediately after entering this TEST MODE.
2
If the test finishes normally, "GOOD" will flash, and if it finishes and there is a problem, "BAD" will flash.
If connection was not allowed, "N/A" will flash.
NOTE: Tests performed immediately after changing settings may not display results correctly. Reset the power and
perform the test again.
3
When the test finishes, press the TEST Button to return to the NETWORK SETTING screen.
NETWORK TEST
*.**
GOOD
**%
← Only displayed during test.
← YOU
← GATEWAY SERVER
← EXTERNAL SERVER
Advertisement
Table of Contents
