Setting For Communication Play - Sega WaveRunner Owner's Manual

20 - 3 SETTING FOR COMMUNICATION PLAY

Change the game setting for each seat in manner so as to meet communication play. If the
setting is not correct, communication play cannot be played.
SETTING FOR COMMUNICATION PLAY
1
Turn the linked machines' power on.
2
Cause all of the machines to enter the test mode (see Section 9).
3
Select the GAME ASSIGNMENTS (see 9-3 d).
GAME DIFFICULTY
COMMUNICATION MODE
HANDICAP
CABINET ID
> EXIT
SELECT WITH SERVICE BUTTON
FIG. 20. 3 GAME ASSIGNMENTS Screen
4
Perform the COMMUNICATION MODE setting in the GAME ASSIGNMENTS screen. Set
one of the machines to MASTER and all others to SLAVE.
5
Perform the CABINET ID setting in the GAME ASSIGNMENTS screen. Set the machines to 1,
2, 3 and 4 sequentially in order starting from the leftmost machine facing the screen. Set every
number correctly without duplicating.
6
Cause all of the machines to exit from the test mode by selecting EXIT in the System Test
Menu.
7
Exiting from the test mode causes the unit to perform the network check automatically. The
Network Check screen appears on the screen.
8
When finishing the network check successfully, the Advertise Screen appears. Normally the
network check finishes within several 10 seconds. If the screen does not proceed from the
Network Check screen, some sorts of errors such as the error of the setup, the error of cable
connection, and malfunctioning the communication cables, etc. can be considered.
www.seuservice.com
GAME ASSIGNMENTS
NORMAL
NO LINK
ON
1
AND PRESS TEST BUTTON
If it is set to SLAVE,
GAME DIFFICULTY and
HANDICAP are
disappeared on the screen.
114