Sega TETRIS GIANT Owner's Manual page 152

8
Connect the 3 connectors.
NOTE: The SM6P and SM7P connectors are
not used.
9
When attaching a GD-ROM DRIVE, use 4 tapping screws to fasten it to the base (wooden plate).
TAPPING SCREW (4)
3.5 x 16
10
Use a GD cable and GD-ROM power cable to connect the NAOMI board and GD-ROM drive.
GD-ROM POWER CABLE (NH6P)
GD CABLE
11
Attach the back door, lock it with the master key, and fasten it in place with 2 truss screws.
Connect the connector.
VL6P, VL8P, SM4P
GD-ROM DRIVE
NAOMI BOARD
SWITCHING TO A NAOMI BOARD
13 mm (0.5 in)
40 mm (1.6 in)
143
18