Sega TETRIS GIANT Owner's Manual page 37

28
ASSEMBLY AND INSTALLATION
7
Line up the 2 roof frames as shown in the figure. Pick up the roof panel with at least 1 other person and
place it on the roof frames with the side with the counter-sunk holes up. Line up the screw holes and fasten
the roof panel to the roof frames with 8 hexagon bolts.
6
HEXAGON BOLT (8), black
M8 x 30, w/spring washer, large flat washer used
8
Perform this step with at least 3 other people. At least 2 people should pick up the roof panel, and at least 2
others should support the screen stand. With the side with the counter-sunk holes down, lift the roof panel
and insert the 2 roof frames all the way before attaching the roof bracket. Be careful not to damage the
screen (white surface) while performing this work.
NOTE: If the roof panel is difficult to attach, another person should lift the roof panel in the center and
ROOF FRAME (2)
straighten out any warping while inserting it.
ROOF FRAME (2)
COUNTER-SUNK HOLE
ROOF FRAME (2)
Insert it all the way until it
touches the metal plate.
ROOF BRACKET
ROOF PANEL