Sega TETRIS GIANT Owner's Manual page 70

PRECAUTIONS WHEN MOVING THE MACHINE
7
● Always disconnect the power cable before moving the product. If it is moved
with the power cable connected, the cable could be damaged, causing fire or
electric shock.
● To move the unit over the floor, pull in the adjustors and have the casters
contact the floor. While moving the unit, be careful that the casters do not
roll over the power cable. If power cable is damaged, there could be electrical
shocks and/or short circuits.
● Always follow the instructions in this manual when lifting the cabinet. Failure to
do so could result in damage to the parts and fittings, or physical injury due to
the weight of the cabinet.
Do not push on the joystick or molded parts when moving the machine. Doing
so could break the parts and fittings, and the fragments could cause an injury.
● When moving the machine across an uneven floor, take it apart into individual
units beforehand. Tilting the machine while it is assembled or setting the cabinet
on an uneven surface could damage the joints on the units.
● In order to prevent scratching the surface of the cabinet, do not tie a rope around
it directly. Place protective material over the places where the rope will touch.
When moving it across the floor, detach the screen stand and top panel.
Refer to Chapter 6 and work in reverse order from "6-1-2 Attaching the Roof Panel" to perform the detaching work.
PRECAUTIONS WHEN MOVING THE MACHINE
61
7