Sega TETRIS GIANT Owner's Manual page 36

3
Refer to Step 2 and remove the side banner sash on the opposite side as well.
4
Remove the 5 truss screws and take off the front center banner sash. Another person should support the
front center banner sash so that it does not fall off.
TRUSS SCREW (5), black
M5 x 12, large flat washer used
5
Pick up the roof panel and turn it over with at least 1 other person.
6
Remove the 5 truss screws and take off the rear center banner sash.
TRUSS SCREW (5), black
M5 x 12, large flat washer used
ASSEMBLY AND INSTALLATION
FRONT CENTER BANNER SASH
REAR CENTER BANNER SASH
27
6