106
COIN SELECTOR
5
Open the gate and dust off by using a soft brush (made of wool, etc.).
6
Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then
squeezed dry.
7
Remove the cradle. When removing the retaining ring (E ring), be very careful so as not to bend the rotary
shaft.
10
8
Remove stain from the rotary shaft and shaft receiving portions by wiping off with a soft cloth, etc.
9
After wiping off as Steps above, further apply a dry cloth, etc. to cause the coin selector to dry completely.
10
Refer to Steps 1 to 4 and work in reverse order to attach the
coin selector.
NOTE: Hold the reject button lever up while attaching the
coin selector so that the reject button lever catches
GATE
CRADLE
SELECTOR LEVER
REJECT BUTTON LEVER