Sega TETRIS GIANT Owner's Manual page 33

24
ASSEMBLY AND INSTALLATION
16
Perform this step with at least 3 other people. Put the screen
stand upright and move it to the installation site. Wear gloves
to prevent the screen (white surface) from getting dirty.
6
The drawing is 1/100 of the actual size.
Use it as a reference for the layout at the
installation site.
17
From the back of the screen stand, fasten the 2 back panel brackets to it using 2 truss screws. Place the
holes on the bracket over the protruding part of the screw holes, and fasten it in place with truss screws.
BACK PANEL BRACKET
PROTRUDING PART OF SCREW HOLE
2 places
TRUSS SCREW (2), black
M5 x 12, large flat washer used
BACK PANEL BRACKET
(2)
HOLE
2 places