Canon imageRUNNER ADVANCE C3330 Series Service Manual page 873

COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
WUEV-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
WUEV-INT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Amount of Change per
Unit
WUEV-POT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
WUEV-RTR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
ON/OFF of sleep notification to appli
To set whether to notify the sleep mode to the application (imageWARE, etc) on the network when
shifting to/recovering from the sleep mode.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: ON, 1: OFF
0
COPIER> OPTION> NETWORK> WUEV-INT, WUEV-POT, WUEV-RTR
Setting of sleep notification interval
To set the interval of sleep notification.
When WUEV-SW is 0, this setting is enabled.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
60 to 65535
sec
600
COPIER> OPTION> NETWORK> WUEV-SW
1
Set port number for sleep notification
To set port number of the PC to notify the sleep mode.
When WUEV-SW is 0, this setting is enabled.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 65535
11427
COPIER> OPTION> NETWORK> WUEV-SW
Setting of extent of sleep notification
To set the number of available routers to the target for sleep notification.
When WUEV-SW is 0, this setting is enabled.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 254
3
COPIER> OPTION> NETWORK> WUEV-SW
861
8. Service Mode