Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1098

Hide thumbs Also See for imageRUNNER ADVANCE C3330 Series:

Table of Contents

16. Connect both ends of the DVI Cable, and tighten the Fixation Screws.

• 2 Fixation Screws each

17. Remove the covers of the 7 Cord Guides, and affix the Cord Guides to the position as shown in the figure.

18. Insert the DVI Cable through the Cord Guides, and install the 7 covers of the Cord Guides.

• Do not cover the Exhaust Outlet with the Cord Guide.

• Do not affix a Cord Guide on the Reader Cable Cover.

Reader Cable Cover

9. Installation

Troubleshooting