Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1211

Data Location
Key information to be used for FLASH
encryption when TPM is OFF
Key and settings information to FLASH / HDD/TPM
be used for encryption when
TPM is ON
Service Mode
Service Mode setting values HDD
(MN-CON)
Service Mode setting values DC-CON
(DC-CON)
Service Mode setting values (R- FLASH
CON)
Counter information
Department ID Counter FLASH
Sevice Counter (MN-CON) FLASH
Sevice Counter (DC-CON) DC-CON
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
*15
*16
*17
*18
*19
*20
Backup Method using DCM (Settings/Registration : Management Settings : Data Management > Import/Export All)
Yes/No Method
No ---
No ---
Yes(*17) RUI / USB / Service Mode /
WebService
Yes(*17) RUI / USB / Service Mode /
WebService
Yes(*17) RUI / USB / Service Mode /
WebService
No ---
No ---
No ---
Backup method
Location Compatibility: iRADV (2) to
this model
--- No
--- No
PC/USB/HDD Yes
PC/USB/HDD Yes
PC/USB/HDD Yes
--- No
--- No
--- No
The following settings are deleted.
Preferences > Paper Settings >Register Envelope Drawer
Preferences > Paper Settings >B5/EXEC Paper Selection
Preferences > Paper Settings >A5R/STMTR Paper Selection
Preferences > Timer/Energy Settings > [Adjust Time]/[Date/Time Settings] is excluded
The following settings are deleted.
Function Settings > Common > Paper Feed Settings > Paper Drawer Auto Selection On/Off
Function Settings > Common > Paper Feed Settings > Feed Method Switch
The following settings are deleted.
Function Settings > Common > Scan Settings >Scanner Noise Settings
Function Settings > Common > Scan Settings >Timing to Raise Feeder Tray
Function Settings > Common > Scan Settings >Streak Prevention
Backup is available only "Favorite Settings" in "Scan to Send"
If the machine can be activated in download mode at the time of HDD failure, backup of Meapback using SST/USB may be possible. In this case,
restore the backed-up Meapback after replacing the HDD so that Meapback information can be recovered.
"Web Access Favorites" is the only data which can be backed up by a method other than collective export in DCM.
The data saved using a MEAP application can be backed up only when the MEAP application has a backup function.
Since the password is TPM-encrypted and saved, password backed up after all data/settings have been initialized cannot be restored. When all
data/settings have been initialized, initialize the password using a switch license for password initialization.
[Reference] Since TPM encryption key is updated when all data/settings are initialized, the password which was backed up cannot be read.
The audit log which was backed up cannot be restored to the device.
If the backup key information in the HDD is missing, it is automatically recovered from the key in the FLASH PCB.
When replacing the HDD and FLASH PCB simultaneously, the key information is not restored automatically.
An error code is displayed when "ON" is displayed for the TPM setting.
After all data/settings are initialized after restart, select "ON" for the TPM setting to enable the TPM setting.
If the TPM key information in the FLASH is lost, the key information in the FLASH is automatically recovered from the backup of the common key
in the HDD. Then the internal state of TPM setting changes to "ON". However, the display on the UI remains "OFF", therefore the TPM setting needs
to be manually changed to "ON".
The TPM setting changes to "OFF" when all the data/settings have been initialized.
Only backup in preparation for a TPM PCB failure is possible. Moreover, data cannot be restored to other machines where the TPM setting is set
to "ON".
Service mode setting values can be backed up and restored by the user from RUI/WebService only when COPIER>OPTION>USER>SMD-EXPT
is set to ON.
The data retained by MEAP application itself is not included in the target of backup.
Detailed parameters cannot be imported by default. Only basic parameters can be imported. Detailed parameters can be imported when "All" is set
in Settings/Registration > Device Information Delivery Settings > Set Paper Information. However, it is not recommended to import detailed pa-
rameters to/from different models.
The password of "Administrator", which is a default administrator account, is initialized to "7654321". User information other than that is not initialized.
1199
Backup by main power OFF
Yes/No Method
No ---
No ---
Yes Turn OFF the main power
switch.
No ---
No ---
No ---
No ---
No ---
Backup Data
Location
---
---
FLASH
---
---
---
---
---