20. Secure the Power Cable and Signal Cable in place using the Wire Saddle.
21. Install the HDD Frame to the host machine by sliding it.
• 3 Hooks
• 1 Screw (Use the screw removed in step 1.)
• 2 Connectors
• 1 Edge Saddle
CAUTION:
Install the HDD Frame
• Be sure to install the HDD Frame by holding the cable and pushing the HDD Frame.
• Do not damage the cable with the edge, etc. during installation.
• Be careful not to drop the screws.
22. Install the Wire Saddle to the Controller Box Frame.
1x
1x
1x
2x
1182
9. Installation