Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1162

2.
3.
HDD Initialization Procedure
1. Items to be prepared
1. PC
Be sure that the version of the Service Support Tool that supports the host machine is installed.
2. Crossover Ethernet cable.
2. Preparing for the Installation of the System Software of Host machine
1. If the PC and host machine have been started, turn the main power OFF.
2. Connect the PC and the machine using an Cross Ethernet cable. (In case of SST).
3. Turn ON the power of the PC.
3. Registering the system software
1. Insert the latest System Software into the PC using the SST.
2. Start the SST.
3. Click 'Register Firmware'.
4. Select the drive where the system software has been inserted, and click the [SEARCH] button.
5. Click the [REGISTER] button.
6. Click [OK].
2x
2x
1150
9. Installation