Removing The Registration Guide Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

NOTE:
Points to Note at Installation:
1. Align the 4 ribs [1] of the Secondary Transfer Guide Unit with the Registration Roller [2].
2. Fit the 2 protrusions [3] of the Secondary Transfer Guide Unit to the springs [4].
3. Fit the 2 protrusions [1] on the front side into the holes [2] of the guide.
CAUTION: Be sure that the rib [A] is inside the Secondary Transfer Guide Unit.
4. Fit the protrusion [2] while bending the guide [1] on the rear side.
NOTE:
• Be sure to replace the Registration Roller at the same time as the Cassette 1 Vertical Path Roller.
* This is because the Speed Control varies as the roller wears.
• Parts Counter : COPIER > COUNTER > DRBL-1 > REG-RL
• REG-RL is also cleared at the same time when R-DOOR is cleared.

Removing the Registration Guide Unit

[1]
[2]
[1]
[2]
[2]
[1]
4. Parts Replacement and Cleaning
[3]
[4]
[4]
[3]
[4]
[4]
384
[3]
[3]