4. Remove the Reader Front Sub Cover. (Removed Reader Front Sub Cover will not be used.)
• 1 Screw (Removed screw will not be used.)
• 1 Claw
• 2 Bosses
5. Install the DP Base Cover to the DP Base.
• 2 Bosses
• 4 Hooks
NOTE:
Align the 2 hooks [A] and the bosses (in the DP Base Cover) with the corresponding holes for the hooks and long holes for the
bosses (in the DP Base), and push the DP base in to the DP Base Cover. Installation becomes difficult if the bosses and their
positioning holes are aligned first.
1x
Boss
Claw
Hook [A]
Boss
Hook
1095
9. Installation
Hook [A]
Hook