Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1085

Stamp Unit-B1
Points to Note at Installation
In order to enable the stamp function, it is necessary to enable the SEND function (Color Universal Send Kit).
CAUTION:
Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
Installation Outline Drawing
Check Items when Turning OFF the Main Power
Chek that the main power switch is OFF.
1. Turn OFF the main power switch.
2. Be sure that display in the Control Panel and the lamp of the main power supply are turned off, then disconnect the
power plug.
1073
9. Installation