Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1014

Hide thumbs Also See for imageRUNNER ADVANCE C3330 Series:

Table of Contents

2. The machine must not be installed near a source of fire or in an area subject to dust or ammonium gas. If the area

is exposed to direct rays of the sun, provide curtains to the window.

3. Be sure to provide adequate ventilation of the room to keep the work environment comfortable. Room odor can be

bothering when running the machine for a long time in a poorly-ventilated room although the ozone amount

generated while running this equipment does not harm human health.

■ Checking the Installation Space

1. Be sure that the feet of this machine are properly set. In addition, be sure to keep the machine horizontal.

2. Be sure to keep 100 mm or more distance from the wall to make enough room for performing the operation.

• When option is not installed

• When the Booklet Finisher-U1 is installed

3. Install the machine in a well-ventilated location. In a location with a mixture of multiple host machines, be sure to

install the machine where the air exhausted from other machines will not directly enter the machine. Also, do not

install the host machine near an inlet for ventilating the room.

■ Points to Note before Installation

When installing the machine, be sure to note the following points.

1. When the machine is moved from a cold location to a warm location, condensation may occur resulting in water

drops on the metal surfaces. Use of the host machine when there is condensation may result in image failure. After

moving the machine from a cold location to a warm location, leave it unpacked for at least 2 hours or more to let it

warm up to room temperature before installation.

2. The maximum weight of the machine is approx. 71 kg Be sure to perform the work in accordance with the standard

to handle a heavy load in each country. In addition, be sure to keep the machine leveled when lifting it..

or more 500 mm

9. Installation

Troubleshooting