Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1100

4. Install the 2 Cord Guide Covers.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover.
Checking after Installation
NOTE:
When changing the settings upon user's request, it is required to log in as a system manager in accordance with instructions from
the user administrator.
1. Connect the power plug of the host machine to the outlet.
2. Turn ON the main power switch.
3. Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings > Use Voice Navigation, and
check that the setting is ON.
4. Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings > Voice Navigation at Startup,
and check that "Select Mode at Startup" is set.
5. Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings, and check that "Tune
Microphone" is displayed.
6. Turn OFF/ON the main power of the Host Machine.
Operation Check
■ When Starting to Use
1. Press "Reset" key or the Voice Recognition button for more than 3 seconds.
2. In "Select the Voice Navigation type." on the Control Panel screen, select "Manual + Vocal Mode", "Vocal Mode" or
"Manual Mode", and press OK.
3. Once the indication on the screen is framed in red, the "Voice Operation Kit" becomes enabled.
NOTE:
When "Manual Mode" is selected in "Select the Voice Navigation type.", nothing happens by pressing the Voice Recognition button.
10x
1088
Reader Cable Cover
Wire Saddle
[A]
Exhaust Outlet
9. Installation