Version Upgrade Via Cds - Canon imageRUNNER ADVANCE C3330 Series Service Manual

6. The following screen will appear. Select the version upgrade method to perform, and press [0].
During the download process, download status is displayed on the control panel.
Writing to the system software area on the FLASH PCB is started once download is completed. When writing to the Dcon
(ACC1, CCM or CCB if there is an option) is completed, the machine is automatically restarted. After writing of SafeCont is
completed, the machine is automatically restarted again.
7. When the main menu is displayed, press the removal key at the bottom right on the touch panel and select removal
of memory media device, and then remove the USB memory storage device.
8. Enter service mode to check the version.

Version Upgrade via CDS

■ Overview
Among the 4 methods in which service technicians provide firmware install services, the following 3 methods are available using
Updater functions.
"UGW-linked Download and Update (Full-remote Update)" on page 465
"UGW-linked Download (Remote Distribution Update)" on page 466
"Manual Download and Update (On-site Update from Service Mode)" on page 467
[ Backupless mode ] has been selected.
Please press Update mode.
[1] : Update (Auto)
[2] : Update (w Confirmation)
[3] : Update (Overrite all)
[C] : Return to Main Menu
---------------------------------------------------------------
/[1] has been selected. Execute?
-(OK):0 / (CANCEL): Any other keys-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FirmDownload 0% FirmBackup
StdCont -%
Dcon -% CCM
ACC1 -% CCB
ACC2 -% RCON
ACC3 -% TSP
Reboot
SafeCont -%
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Updating software... Do not turn OFF the main power.
Mise a jour du ligiciel... Ne mettez pas le peripherique hors tension.
Software wird aktualisiert...Schalten Sie das Gerat nicht AUS.
ソフトウェアの更新中です。電源を切らないでください。
464
-%
-%
-%
-%
-%
6. Troubleshooting