Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1189

Hide thumbs Also See for imageRUNNER ADVANCE C3330 Series:

Table of Contents

12. Pass the Power Cable and Signal Cable through the hole in the HDD Frame.

Set the HDD Toggle Lever in the correct position as shown in the figure, and check that the HDD Case can be inserted all

the way and installed properly. Unless the HDD Toggle Lever is in the correct position, the HDD Case cannot be installed.

13. Install the HDD Slot to the HDD Frame.

Be sure not to trap the Power Cable and Signal Cable during installation.

9. Installation

Troubleshooting