Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1010

8. Service Mode
SORTER (Service mode for delivery options) > OPTION (Specification setting mode)
FR-ST-SW 1 Stp-free Stp Set in No Stp Ctrdg: Fin-G1
Detail When the staple cartridge is absent, staple-free stapling is not actually performed in the default
setting while a job with staple-free stapling has executed since the finisher behaves in non-sort
mode. Set to "1" to enable the staple-free stapling without staple cartridge.
Use Case
When utilize the staple-free stapling without staple cartridge
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
If a staple cartridge should be left in the finisher with the setting turns to "1" and the cartridge sits
unstable, error; 1C32 or E532 may come out when staple-free stapling is performed.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
998