Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1102

USB Device Port-E4
Points to Note at Installation
• When installing the Inner Finisher and this equipment simultaneously, be sure to install this equipment first.
• If the Inner Finisher is installed, this equipment cannot be installed unless it is removed. For details of removal procedure,
refer to the Service Manual.
• The USB Device Port must be installed beforehand to install the Card Reader (sales company's option).
CAUTION:
Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
Check Item when Turning OFF the Main Power
Check that the main power switch is OFF.
1. Turn OFF the main power switch of the host machine.
2. Be sure that Control Panel Display and the Main Power lamp are both turned OFF, and then disconnect the power
plug
Installation Outline Drawing
Checking the Contents
Be sure to use A, G, H and J with this product.
Others are the parts for other products.
1090
9. Installation