Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1197

2. Be sure to request the user to padlock the removable HDD to discourage theft.
HDD Initialization Procedure
■ 1. Items to be prepared
1. PC
Be sure that the version of the Service Support Tool that supports the host machine is installed.
2. Crossover Ethernet cable.
■ 2. Preparing for the Installation of the System Software of Host machine
1. If the PC and host machine have been started, turn the main power OFF.
2. Connect the PC and the machine using an Cross Ethernet cable. (In case of SST).
3. Turn ON the power of the PC.
■ 3. Registering the system software
1. Insert the latest System Software into the PC using the SST.
2. Start the SST.
3. Click 'Register Firmware'.
4. Select the drive where the system software has been inserted, and click the [SEARCH] button.
5. Click the [REGISTER] button.
6. Click [OK].
■ 4. Initializing HDD
● < In case of SST >
1. Start the host machine with download mode in safe mode.
2. Start the SST.
3. Select the model. Then, select [Single] and click [Start].
4. Click [Format HDD].
5. Select [All], and click [Start].
6. Click [Execute Format].
7. The Format is executed.
8. Click [OK].
9. After formatting is completed, select [Shutdown/Restart], and click [Restart].
10. Click [OK]
11. The power of the host machine is turned OFF.
12. Terminate the SST.
13. Disconnect the Cross Ethernet Cable from the machine, and connect the user's network cable to the machine.
● <In case of USB flash drive>
1. Connect the USB memory to the PC.
2. Start up SST, and click the USB icon displayed in the target selection screen.
1185
9. Installation