Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1188

9. Affix the HDD Warning Label in the appropriate language, aligning the label with the Rib.
CAUTION:
Be sure to affix the HDD Warning Label in the direction as shown in the figure.
10. Write down the serial number of the host machine to the R-HDD Label, and affix it to the space on the top of the
HDD.
CAUTION:
• Be sure to write down the serial number on the R-HDD Label in order to show from which machine it was removed
and prevent it from being installed to another machine.
• Be sure to affix it on a flat surface.
<Execute only in the case of Removable HDD Kit-AK1>
11. Remove the Relay Connector. (The removed Relay Connector will not be used.)
• 1 Connector
1x
1176
Serial No.
XXXXXXXX
Rib
9. Installation