Port Trunking - Enterasys VH-2402-L3 Management Manual

It is advisable to define an STP Group to correspond to a
VLAN group of ports.
Parameter
View Ports:<
Configure Ports:[
to [ ]
Port Cost:[
Priority:[ ]

Port Trunking

To configure a port trunking group, highlight Port Trunking
on the Main Menu and press Enter.
9033691-01
Description
> This field can be toggled using the space
bar between 1 to 12, 13 to 24, and 25-
26. This is used to select the range of
ports displayed in the console.
] Allows the entry of a range of port
numbers to be configured.
] A Port Cost can be set from 1 to 65535.
The lower the number, the greater the
probability the port will be chosen to
forward packets.
A Port Priority can be from 0 to 255. The
lower the number, the greater the
probability the port will be chosen as the
Root Port.
Figure 1-61. Port Trunking Setup
VH-2402-L3 Management Guide 79