Canon PRO-10 Series Manual page 82

Home > Overview of the Printer
C021
Loading Paper in the Rear Tray
You can load A3+, A3, B4, A4, B5, A5, Letter, Legal, 11" x 17" (279.4 x 431.8 mm), 4" x 6" (10 x 15 cm), 5"
x 7" (13 x 18 cm), 8" x 10" (20 x 25 cm), and 10" x 12" (25 x 30 cm) sizes of paper in the rear tray.
Important
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform
trial print, it can cause paper jams.
Note
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see
You can use general copy paper.
For the page size and paper weight you can use for this printer, see
1.
Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until
the paper becomes completely flat.
For details on how to flatten curled paper, see "Load the paper after correcting its curl." in
Is Smudged/Printed Surface Is
When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at
a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the
paper and reduce the print quality.
2.
Load paper.
(1) Open the paper support of the rear tray.
(2) Open the paper output tray gently.
Important
If the inner cover
(3) Pull out the output tray extension.
> Loading Paper > Loading Paper
Media Types You Can
Scratched.
(A) is open, close it.
> Loading Paper in the Rear Tray
Use.
Media Types You Can Use.
Paper