Canon PRO-10 Series Manual page 678

Print Studio Pro Guide > Printing
That on the Monitor
S735
Printing with an Impression Close to That on the Monitor
You can print with an impression close to that on the monitor by correctly reflecting the characteristics of
the data displayed on the monitor.
Important
When you want to print with an impression close to that on the monitor, it is recommended that you
set the monitor and ambient light as follows.
Monitor
Color temperature: D50 (5000 K)
Luminance: 120 cd/m2
Gamma: 2.2
Ambient light
D50 fluorescent lamps designed for color evaluation (color temperature: 5000 K, high color
rendering properties)
Brightness when viewing printed materials: 500 lx ± 125 lx
1.
Start Print Studio Pro, then make sure that the images you want to print are
displayed in the Thumbnails area at the bottom left of the screen.
Note
Refer to "Starting Print Studio
2.
Select Use ICC Profile or PRO Mode for Color Mode in Color Management.
Select a color mode according to the color space of the image to be printed. Canon recommends the
following combinations.
Color Space
Adobe RGB Use ICC Profile (Rendering Intent: Perceptual)
sRGB
Important
> Printing after Color Management
Pro" for how to start Print Studio Pro.
Color Mode
PRO Mode
> Printing with an Impression Close to